{"product_id":"creatbot-peek-250","title":"CreatBot PEEK-250","description":"\u003cp\u003eMeet the CreatBot PEEK-250, a powerful desktop 3D printer that brings heavy-duty industrial manufacturing right to your workspace. Built specifically to handle high-performance plastics like PEEK and PEI, it features a 480°C single nozzle, a 200°C heated bed, and an incredibly hot 200°C heated chamber. To keep everything running smoothly and safely at those extreme temperatures, it uses a smart liquid cooling system wrapped in quadruple-layer insulation. It gives you a complete, all-in-one setup for printing incredibly tough, professional-grade parts without taking up your entire floor.\u003c\/p\u003e\n\u003ch3\u003eThe World's First\u003c\/h3\u003e\n\u003cp\u003eDesktop high-temperature 3D printer with a max hot chamber of 200°C\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_01.png?v=1784402364\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the hot chamber reaches 180°C, the outer surface temperature is less than 40°C (after 5 hours of heating).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_02.png?v=1784402400\"\u003e\u003c\/p\u003e\n\u003cp\u003eRaise the hot chamber temperature to 180°C within 20 min\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_03.png?v=1784402428\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy is a 180 °C hot chamber so important?\u003c\/h3\u003e\n\u003cp\u003eAn ambient temperature of 180°C is required for PEEK to anneal. Therefore, after the device prints the PEEK model, it can be annealed directly in the device.\u003c\/p\u003e\n\u003cp\u003eThe advantages of doing so are:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThere is no need to remove the model from the platform to avoid the bottom of the model losing platform adhesion, resulting in the internal stress of the bottom model losing platform restraint, causing the bottom of the model to deform after post-processing.\u003c\/li\u003e\n\u003cli\u003eAvoid shutting down and cooling the model to take out the model. There is no exchange of hot and cold environments, which causes the model to have a large temperature difference in a short period of time, and the internal stress is fixed, and it cannot be effectively post-heat-treated.\u003c\/li\u003e\n\u003cli\u003eAfter printing, the annealing treatment can be set directly inside the printer without any time delay. For example, it is set in advance to stand in a 180°C environment for 5 hours after printing, and then stand in a 120°C environment for 5 hours to fully anneal the PEEK parts\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e180°C is the temperature at which PEI material can be perfectly printed.\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePrinting environment temperature requirements: Usually set between 160°C and 200°C to ensure that the material can be fully extruded and bonded and reduce the internal stress after molding to prevent cracking. The recommended ambient temperature is 180°C to improve fluidity, obtain higher combined line strength, and improve heat resistance and chemical corrosion resistance by reducing molding internal stress.\u003c\/li\u003e\n\u003cli\u003ePEI has hygroscopic properties and can cause material degradation. The humidity value is required to be less than 0.02%. The drying conditions are 150°C and 4 hours of drying treatment, and the drying treatment can be carried out directly in the cavity\u003c\/li\u003e\n\u003cli\u003ePEI materials also usually need to be annealed after molding to eliminate the internal stress generated during the molding process. The advantages of direct annealing are the same as PEEK.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eUltra-high temperature extruder system\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_04.png?v=1784402743\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEquipped with a double-tooth silicon carbide extruder, it offers high torque, super wear resistance, and no step loss. It can print all filaments below 500°C, especially carbon fibre and glass fibre materials.\u003c\/p\u003e\n\u003cp\u003eA water-cooling device is necessary; it is key to smooth printing with high-temperature filament. Hot-end is an Integrated die-casting wear-resistant nozzle, which can be replaced within 30 seconds without removing other parts or screws.\u003c\/p\u003e\n\u003ch3\u003e200°C thermally uniform chamber\u003c\/h3\u003e\n\u003cp\u003eThe special spoiler device allows the hot air in the cavity to circulate 360°, ensuring the cavity is heated evenly and that the polymer material model is uniformly crystallized at any angle, resulting in perfect formation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_01.png?v=1784402364\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eChamber thermal insulation\/safety\u003c\/h3\u003e\n\u003cp\u003eFor the first time, an aviation-grade heat-insulating sports protective cover is used in professional-grade equipment. Through clever design, multi-path heat dissipation, customized high-temperature resistant parts, and the use of multi-layer heat-insulating materials, when the chamber temperature reaches 180°C, the temperature of the front door, top door, screen area, body, and side panel area of the machine is within 40°C, ensuring the safety of users.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_05.png?v=1784402870\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHigh temperature platform 200°C\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAviation-grade ultra-flat platform + polymer-based coating\u003c\/li\u003e\n\u003cli\u003eNatural flatness 0.05mm\u003c\/li\u003e\n\u003cli\u003eHigh temperature flatness 0.1mm (cavity temperature 180°C)\u003c\/li\u003e\n\u003cli\u003eNo manual or automatic levelling required, avoiding manual levelling or sensor failure in high-temperature environments\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_06.png?v=1784402960\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eOne-stop annealing function\u003c\/h3\u003e\n\u003cp\u003eAfter the model is printed, there is no need to peel the model from the platform, cool it naturally, or anneal it in the annealing furnace.\u003c\/p\u003e\n\u003cp\u003eYou can select the 'direct annealing after printing' function for the corresponding material, such as PEEK, PEI, etc., on the screen in advance. You can also modify the built-in annealing temperature and time in the settings to achieve one-click annealing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/Create_PEEK_250_-_07.png?v=1784403046\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterial Types Supported by PEEK 3D Printers\u003c\/h3\u003e\n\u003cp\u003eCreatbot 3D printers have strong adaptability and stability for various filaments. Relying on hardware advantages (all-steel body, precise linear guides, adjustable-temperature nozzle\/chamber, etc.), they can perfectly match all plastic 3D printing filaments, achieving optimal filament printing results and aligning with their material characteristics.\u003c\/p\u003e\n\u003ch4\u003eHigh Performance Materials\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eKey Features\u003c\/th\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePEEK\u003c\/th\u003e\n\u003ctd\u003eUltra-high strength, 250°C+ temperature resistant, chemical corrosion resistant\u003c\/td\u003e\n\u003ctd\u003eAerospace, medical implants, automotive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePEEK-CF\u003c\/th\u003e\n\u003ctd\u003eExtremely high rigidity, lightweight, fatigue resistant\u003c\/td\u003e\n\u003ctd\u003eHigh-load structural parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePEEK-GF\u003c\/th\u003e\n\u003ctd\u003eHigh strength, excellent dimensional stability\u003c\/td\u003e\n\u003ctd\u003eIndustrial parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePEI 1010\u003c\/th\u003e\n\u003ctd\u003eHigh temperature resistant, sterilizable, eco-friendly\u003c\/td\u003e\n\u003ctd\u003eMedical, food contact parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePEI 9085\u003c\/th\u003e\n\u003ctd\u003eFlame retardant (UL94 V0), high strength, heat resistant\u003c\/td\u003e\n\u003ctd\u003eAerospace, rail transportation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eStandard Materials\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eKey Features\u003c\/th\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePLA\u003c\/th\u003e\n\u003ctd\u003eEasy to print, biodegradable, low cost\u003c\/td\u003e\n\u003ctd\u003eCreative products, education, simple prototypes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePLA-CF\u003c\/th\u003e\n\u003ctd\u003eCarbon fiber reinforced, high rigidity, lightweight\u003c\/td\u003e\n\u003ctd\u003eBrackets, model frames, simple tooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePETG\u003c\/th\u003e\n\u003ctd\u003eBalanced, impact resistant, semi-transparent\u003c\/td\u003e\n\u003ctd\u003eElectronic enclosures, daily containers, transparent parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTPU 95A\u003c\/th\u003e\n\u003ctd\u003eHard elastic, wear-resistant, bendable\u003c\/td\u003e\n\u003ctd\u003eSeals, wearable devices, soft parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePC\u003c\/th\u003e\n\u003ctd\u003eHigh transparency, high strength, high temperature resistant\u003c\/td\u003e\n\u003ctd\u003eProtective shells, car lamp covers, high temperature fixtures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eEngineering Materials\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eKey Features\u003c\/th\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eABS\u003c\/th\u003e\n\u003ctd\u003eHigh strength, machinable, impact resistant\u003c\/td\u003e\n\u003ctd\u003eCar interiors, tooling fixtures, functional prototypes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eASA\u003c\/th\u003e\n\u003ctd\u003eWeather resistant, UV resistant, better than ABS\u003c\/td\u003e\n\u003ctd\u003eOutdoor sculptures, car exteriors, billboards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePVDF\u003c\/th\u003e\n\u003ctd\u003eCorrosion resistant, flame retardant, insulating, high temperature resistant\u003c\/td\u003e\n\u003ctd\u003eChemical pipelines, semiconductor parts, anti-corrosion structures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUltraPA\u003c\/th\u003e\n\u003ctd\u003eHigh toughness, wear-resistant, self-lubricating\u003c\/td\u003e\n\u003ctd\u003eGears, bearings, mechanical transmission parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUltraPA-CF\u003c\/th\u003e\n\u003ctd\u003eCarbon fiber reinforced, high rigidity, lightweight\u003c\/td\u003e\n\u003ctd\u003eDrones, automotive lightweight, high strength tooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUltraPA-GF\u003c\/th\u003e\n\u003ctd\u003eGlass fiber reinforced, insulating, low cost\u003c\/td\u003e\n\u003ctd\u003eInsulating brackets, high temperature fixtures, electronic enclosures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePET-CF\u003c\/th\u003e\n\u003ctd\u003eCarbon fiber modified, low moisture absorption, dimensionally stable\u003c\/td\u003e\n\u003ctd\u003eMechanical brackets, car parts, industrial load-bearing parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePPS-CF\u003c\/th\u003e\n\u003ctd\u003eHigh temperature resistant, corrosion resistant, extremely dimensionally stable\u003c\/td\u003e\n\u003ctd\u003eMotor housings, chemical parts, engine peripherals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSupport Materials\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eKey Features\u003c\/th\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePVA\u003c\/th\u003e\n\u003ctd\u003eWater soluble, no residue\u003c\/td\u003e\n\u003ctd\u003eCompatible with PLA, PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eS-270\u003c\/th\u003e\n\u003ctd\u003eIndustrial grade, high temperature resistant\u003c\/td\u003e\n\u003ctd\u003eCompatible with Nylon, PC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eS-350\u003c\/th\u003e\n\u003ctd\u003eHigh temperature dedicated, high stability\u003c\/td\u003e\n\u003ctd\u003eCompatible with PEEK, PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ch4\u003eTemperature\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eNozzle Max. Temperature\u003c\/th\u003e\n      \u003ctd\u003e480℃\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChamber Temperature\u003c\/th\u003e\n      \u003ctd\u003e200℃\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePlatform Max. Temperature\u003c\/th\u003e\n      \u003ctd\u003e200℃\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpeed\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eBest Printing speed\u003c\/th\u003e\n      \u003ctd\u003e55 mm\/s\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMax. Printing speed\u003c\/th\u003e\n      \u003ctd\u003e180mm\/s\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSoftware\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSoftware\u003c\/th\u003e\n      \u003ctd\u003eCreatware, Simplify3D, Cura, Slic3r\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOperating Systems\u003c\/th\u003e\n      \u003ctd\u003eWindowsall, macOS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePrint File Type\u003c\/th\u003e\n      \u003ctd\u003eGcode, STL, 3MF, OBJ, AMF, STP, STEP\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eElectrical\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eInput Power\u003c\/th\u003e\n      \u003ctd\u003e200V~240V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eRated Power\u003c\/th\u003e\n      \u003ctd\u003e2500W\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eScreen\u003c\/th\u003e\n      \u003ctd\u003e7'' full color touch screen, multi-language\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePrint Method\u003c\/th\u003e\n      \u003ctd\u003eUSB Connectivity\/USB Disk\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecial Function\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOutage Restored\u003c\/th\u003e\n      \u003ctd\u003eSave data when power is off\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eFilament Detection\u003c\/th\u003e\n      \u003ctd\u003ePause printing when filament run out\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eThermal insulation\u003c\/th\u003e\n      \u003ctd\u003eThree layer insulation+Active air cooling (Chamber temp. reaches 180 ° C, the external surface temp. is less than 40 ° C)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eHigh temperature accessories\u003c\/th\u003e\n      \u003ctd\u003eHigh temperature resistance motors, linear rails, belts and circuits to ensure long time high temperature printing.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eDoors cooling\u003c\/th\u003e\n      \u003ctd\u003eActive air cooling\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eMechanical\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCooling\u003c\/th\u003e\n      \u003ctd\u003eAir pump cooling \u0026amp; water cooling\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePlatform\u003c\/th\u003e\n      \u003ctd\u003ePCB aluminum + PEEK print board\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePositioning Precision\u003c\/th\u003e\n      \u003ctd\u003eX Y axis 0.0127mm, Z axis 0.00125mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eExtruder\u003c\/th\u003e\n      \u003ctd\u003eDirectly Drive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMachine Construction\u003c\/th\u003e\n      \u003ctd\u003eFully enclosed hot chamber\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSize \u0026amp; Weight\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMachine Size\u003c\/th\u003e\n      \u003ctd\u003e630*555*815mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eN.W\u003c\/th\u003e\n      \u003ctd\u003e100 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePacking Size\u003c\/th\u003e\n      \u003ctd\u003e740*680*1030mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eG.W\u003c\/th\u003e\n      \u003ctd\u003e125 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CreatBot","offers":[{"title":"Default Title","offer_id":49892662477043,"sku":"CB-PEEK-250","price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0279\/4541\/files\/CreatePEEK250222.png?v=1783714370","url":"https:\/\/www.reprapwarehouse.com\/products\/creatbot-peek-250","provider":"RepRap Warehouse","version":"1.0","type":"link"}