Bambu Lab H3C • 9-Material Tool Changer 3D Printer

The Bambu Lab H3C prints up to nine materials in one job, and it swaps between them in about 6 seconds. Each of its nine print tools has its own filament path and heater, so every material stays loaded, hot and ready.

That means far less waste than a single nozzle printer. Each swap purges only a tiny bit of filament.

What's Included

• H3C 3D printer
• AMS 3H with 9 sealed slots, built into the printer
• 9 print tools, each with a 0.4 mm hardened steel nozzle

Why You'll Love It

• Nine materials, nine colours or a mix of both in one print
• Big 330 x 320 x 325 mm build space
• Fast: up to 1,400 mm/s and 25,000 mm/s² acceleration
• Soft TPU as soft as 75A, printed at up to 3x the flow of a normal printer
• Prints 1.75 mm and 2.85 mm filament
• Full calibration of all nine tools before every print, with no work from you

Built For Tough Materials

The chamber heats to 65°C, the bed to 120°C and the nozzles to 350°C. That makes ABS, ASA, PC, PA and carbon or glass fibre blends easy to print with less warping. The AMS 3H can dry filament on demand, and an H11 HEPA filter with activated carbon cleans the air.

Specs

• Build volume: 330 x 320 x 325 mm
• Max nozzle temperature: 350°C
• Max bed temperature: 120°C
• Active chamber heating: up to 65°C
• Nozzles: hardened steel, 0.2, 0.4, 0.6 and 0.8 mm supported
• Filament diameter: 1.75 mm and 2.85 mm
• Materials: PLA, PETG, PCTG, TPU, ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS, PVA, BVOH and CF or GF blends
• Screen: 5 inch touchscreen
• Connectivity: Wi-Fi 6, USB, 64 GB storage
• Size with AMS 3H: 493 x 571 x 1016 mm
• Weight with AMS 3H: 36.28 kg

Good For

• Full colour models and figures
• Functional parts that mix rigid and soft materials
• Engineering parts with clean soluble supports
• Print farms, schools and makers who want less waste