Bambu Lab Textured PEI Plate 256 mm, 1st gen
Bambu Lab Textured PEI Plate print surface sample
Bambu Lab Textured PEI Plate 256 mm, 1st gen
Bambu Lab Textured PEI Plate print surface sample
Bambu Lab Textured PEI Plate 256 mm, 1st gen
Bambu Lab Textured PEI Plate print surface sample
Bambu Lab Textured PEI Plate 256 mm, 1st gen
Bambu Lab Textured PEI Plate print surface sample

Bambu Lab Textured PEI Plate 256 mm • P2S, X2D, P1, X1, A1

$49.99 CAD
 per 

Shipping calculated at checkout.

Plate: Textured PEI Plate 256 mm, 1st gen

Fits these printers: Bambu Lab P2S, X2D, P1S, P1P, X1C, X1E and A1. Size: 256 x 256 mm.

This is the 1st gen plate. Bambu makes the 256 mm Textured PEI Plate in two generations. Both are the same size. The only change is the QR code that the printer reads.

Fits fully: A1, P1S, P1P, X1C and X1E. These printers use the 1st gen plate with no extra steps.

P2S and X2D: the plate fits and prints well. These printers read the plate type from the QR code, and they can not read the 1st gen code. If you see "Build plate not recognized", tap "Resolved" on the screen, or turn off Build Plate Detection in the settings.

Prints grab hold on the first layer, then pop right off once the plate cools. The textured PEI gives the bottom of every print a rough, matte finish. Most filaments need no glue.

What's Included

  • 1 x Bambu Lab Textured PEI Plate, 256 x 256 mm (1st gen)

Specs

  • Surface: textured PEI powder coat, 0.075 mm
  • Base: magnetic spring steel, 0.5 mm
  • Heat limit: up to 180°C
  • Print area: 256 x 256 mm

Bed Temps

These are Bambu Lab's starting points. Tune them for your model and filament.

Filament Bed temp Glue?
PLA, PLA-CF, PLA-GF 45 to 60°C No
PETG, PETG-CF 60 to 80°C No
TPU 35 to 45°C No
PVA 45 to 60°C No
ABS, ASA 90 to 100°C Yes
PET-CF 80 to 100°C No
PC, PC-CF 90 to 110°C Yes
PA, PA-CF, PAHT-CF 90 to 110°C Yes

Good To Know

  • Wait until the bed is 35°C or cooler. If a print still sticks, flex the steel plate and it pops off.
  • A hotter bed gives more grip.
  • Lightly sand with 600 grit paper to bring back lost grip.
  • The nozzle wipe area wears over time. That is normal and does not hurt print quality.
  • Wash the plate with dish soap and warm water to keep the grip strong. Dust and skin oil cut grip.
  • Never clean it with acetone. It hurts the PEI.
  • Let the plate cool for a few minutes before you take your print off.
  • Use only Bambu Lab glue on Bambu Lab plates.
  • This plate wears out over time. The warranty covers defects on arrival, not scratches or dents from use.

Good For

  • Everyday PLA and PETG prints
  • Parts that need a grippy first layer
  • High temp filaments like ABS, ASA, PC and nylon
  • A matte, textured bottom face
Shipping
  • We aim to process and ship all orders within 1 to 2 business days.
  • We provide Canada-wide shipping to every province and territory.
  • International delivery is available to many countries via DHL and UPS, though we are not shipping to the USA at this time.
  • If you live near our Edmonton or Sherwood Park locations, you can skip the shipping fees and visit us in person.
  • Pre-ordered items will ship as soon as the inventory arrives at our warehouse.

For more details, see our full shipping policy.

Returns & Refunds
  • Returns are accepted within 30 days of purchase for unopened items and within 14 days for opened items in new condition.
  • To qualify for a return, items must be in original packaging with all accessories and proof of purchase.
  • Please note that opened consumables like filament and resin, as well as modified items or final sale products, are not eligible for return.
  • A 15% restocking fee applies to all non-defective returns to cover processing and inspection.
  • If you receive a defective or damaged product, please contact us within 7 days of receipt and include photos of the issue.

For complete details on eligibility and shipping responsibilities, please see our full refund policy.

RETURNS & REFUNDS: 30 days for unopened items; 14 days for opened. Items must be in original condition; restocking fees apply. See our refund policy.

Add to Cart Select The Options Above

Your browsing history