Bambu Lab Textured PEI Plate 350 x 320 mm • H2D, H2S
- SKU: FAP025
- VENDOR: Bambu Lab
Shipping calculated at checkout.
Fits these printers: Bambu Lab H2D and H2S. Size: 350 x 320 mm.
Prints grab hold on the first layer, then pop right off once the plate cools. The textured PEI gives the bottom of every print a rough, matte finish. Most filaments need no glue.
What's Included
- 1 x Bambu Lab Textured PEI Plate, 350 x 320 mm
Specs
- Surface: textured PEI powder coat, 0.075 mm
- Base: magnetic stainless steel
- Heat limit: up to 180°C
- Print area: 350 x 320 mm
Bed Temps
These are Bambu Lab's starting points. Tune them for your model and filament.
| Filament | Bed temp | Glue? |
|---|---|---|
| PLA, PLA-CF, PLA-GF | 45 to 60°C | No |
| PETG, PETG-CF | 60 to 80°C | No |
| ABS, ASA | 90 to 100°C | Yes |
| PET-CF | 80 to 100°C | No |
| TPU | 35 to 45°C | No |
| PVA | 45 to 60°C | No |
| PC, PC-CF | 90 to 110°C | Yes |
| PA, PA-CF, PAHT-CF | 90 to 110°C | Yes |
Good To Know
- Wait until the bed is 35°C or cooler. If a print still sticks, flex the steel plate and it pops off.
- A hotter bed gives more grip.
- Wash with dish soap and water to keep the grip strong.
- Never clean it with acetone.
- Lightly sand with 600 grit paper to bring back lost grip.
- Use only Bambu Lab glue on Bambu Lab plates.
- This plate wears out over time. The warranty covers defects on arrival, not scratches or dents from use.
Good For
- Everyday PLA and PETG prints
- High temp filaments like ABS, ASA, PC and nylon
- A matte, textured bottom face
Shipping
- We aim to process and ship all orders within 1 to 2 business days.
- We provide Canada-wide shipping to every province and territory.
- International delivery is available to many countries via DHL and UPS, though we are not shipping to the USA at this time.
- If you live near our Edmonton or Sherwood Park locations, you can skip the shipping fees and visit us in person.
- Pre-ordered items will ship as soon as the inventory arrives at our warehouse.
For more details, see our full shipping policy.
Returns & Refunds
- Returns are accepted within 30 days of purchase for unopened items and within 14 days for opened items in new condition.
- To qualify for a return, items must be in original packaging with all accessories and proof of purchase.
- Please note that opened consumables like filament and resin, as well as modified items or final sale products, are not eligible for return.
- A 15% restocking fee applies to all non-defective returns to cover processing and inspection.
- If you receive a defective or damaged product, please contact us within 7 days of receipt and include photos of the issue.
For complete details on eligibility and shipping responsibilities, please see our full refund policy.
RETURNS & REFUNDS: 30 days for unopened items; 14 days for opened. Items must be in original condition; restocking fees apply. See our refund policy.