Matter3D Performance PETg

Need tougher everyday parts than PLA without jumping to ABS headaches? Matter3D Performance PETg is Canadian-made PETG for functional prints that stay dimensionally steady and print with a wide temperature window.

What's Included

• 1 × Matter3D Performance PETg spool in the colour and size you pick (1 kg or 3 kg where listed)
• 1.75 mm filament, vacuum-sealed with desiccant
• Compounded and extruded in Victoria, BC

Print Settings

• Nozzle: about 235-260°C (start near 245°C and tune)
• Bed: about 75-90°C
• Fan: about 30-50% (lower for stronger parts, a bit higher for cleaner walls)
• Speed: about 50-100 mm/s
• Retraction: about 0.6-1.2 mm at 25-40 mm/s (tune to your machine)
• Dry if the spool sat open: about 65°C for 4-6 hours

Material

• Performance PETg / PETG (Matter3D compounds from premium US-made PETg resin; Eastman Eastar family on current mfr docs)
• 1.75 mm diameter; manufacturer tolerance about ±0.05 mm
• Made in Canada in Victoria, BC
• Tougher and more chemically steady than PLA for many shop and outdoor housings
• Low odor versus ABS; low warp for larger footprints when the bed is hot enough
• Strong stick on PEI - use glue stick or a release layer so you do not rip the plate

Good To Know

• PETG strings more than PLA if wet or too hot. Dry the spool and dial temp down in small steps
• It grips build plates hard. Protect smooth PEI with glue stick when needed
• Open or enclosed printers both work; keep cooling modest for stronger layer bond
• Carbon Fiber PETg is a separate product page - this listing is the unfilled Performance PETg colours
• Local Canadian brand: Matter3D compounds and extrudes in Victoria, BC

Good For

• Functional prototypes, jigs, and fixtures
• Housings and brackets that need more toughness than PLA
• Parts that see cleaners, coolants, or light outdoor weather
• Larger prints that need low warp and steady dimensions