ABS WITH SUPERIOR PRINTING RELIABILITY, PERFORMANCE, AND EASE OF USE.
ABS-R is a new ABS formulation that provides superior printing reliability and performance with a 98% jam reduction for consistent, repeatable ABS prototypes, tools, and parts.
Works with RapidRinse™ Fast Dissolving Support
ABS, FINALLY AS EASY AS PLA
ABS is one of the most in-demand yet difficult materials to 3D print. METHOD X patented VECT™ 110 technology combined with proprietary RapidRinse™ support delivers incomparable ABS parts with unprecedented ease.
TAP WATER SOLUBLE
Forget the cumbersome wash tanks and chemicals - RapidRinse™ dissolves in pure tap water so it’s easy to use in just about any environment.
DISSOLVES IN MINUTES
- METHOD X
- METHOD X Carbon Fiber
- Model 1XA Extruder
- Model 1C Extruder
- LABS GEN 2 Experimental Extruder
- MakerBot RapidRinse
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
|RapidRinse Basic Bundle includes:
RapidRinse 9 pack includes:
DIMENSIONS AND WEIGHT
Spool Diameter: 21.8 cm (8.6 in)
Spool Width: 4.2 cm (1.65 in)
Material Diameter: 1.75 mm
Shipping Weight: 1.1 kg (2.4 lb)
Net Weight: 0.45 kg (1.43 lb)
Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
|Tensile Strength (MPa)||ASTM D648||41|
|Tensile Modulus (MPa)||ASTM D648||2400|
|Strain at Yield (%)||ASTM D648||2.3|
|Strain at Break (%)||ASTM D648||33.4|
|Flexural Strength (MPa)||ASTM D790||79|
|Flexural Modulus (MPa)||ASTM D790||2600|
|Izod Notched Impact Strength (J/m)||ASTM D256||129 – C/H|
|Izod Unotched Impact Strength (J/m)||ASTM D256||970 - C|
|Heat Deflection Temperature – 64 psi (C)||ASTM 648||105|
|Heat Deflection Temperature – 264 psi (C)||ASTM 648||102|