xTool P3 CMYK Inkjet Printing Module • Print Then Cut in Colour
- SKU: P0102000392
- VENDOR: xTool
Shipping calculated at checkout.
Print full-colour designs on your xTool P3, then cut them out with the laser in the same machine. Make colour signs, gifts, décor, stickers and labels with less hand painting.
Works With
- xTool P3 only
- Prints on the P3 slats, or on work raised to the same height as the slats
What It Does
- Prints full-colour CMYK designs, then the laser cuts or engraves them in the same machine
- Prints on wood, paper, cardboard, canvas bags and more
- Prints an area up to 534.67 x 389 mm
- Made for bigger pieces, batch jobs and repeat orders
- Uses the CMYK Ink Cartridge for xTool M2, X1 and P3
What's Included
- xTool P3 CMYK Inkjet Module
- Ink cartridge
- Bottom cap and moisturizing liquid
- Module mounting plate, screw and hex key
- Grease for the mounting plate rollers
- Placing board for the inkjet test, test pad with holder and a spare pad
- Calibration card
- Placing plate for soft materials, magnetic patches and masking tape
- User manual
How To Use It
- Put the slats in, or raise your work so its top is level with the slats. Without this, the P3 can not find the material.
- Take any other module off the P3 laser head before you put this one on.
- Do not hold your work with the material clamps while printing. They can scratch the ink nozzle.
- Keep the material flat. Tape hard material down at the corners.
- Hold soft material on the placing plate with the magnetic patches.
- Set up your print in xTool software.
Specs
| Fits | xTool P3 |
|---|---|
| Print area | 534.67 x 389 mm |
| Ink | CMYK, water-based |
| Ink cartridge | CMYK Ink Cartridge for xTool M2, X1 and P3 |
| Operating temperature | 15 to 35°C |
| Operating humidity | 40 to 60% RH |
Good To Know
- It works standalone only. It does not work with the P3 conveyor feeder.
- The ink is water-based and not waterproof. Prints can smudge or run if they get wet, so do not wash printed items.
- Colours look best on white or light materials. Felt, raw wood and rough burlap print a little lighter.
- Acrylic, metal and stone need a primer coat before you print. Wood and canvas bags print better with one.
- Put the bottom cap back on after printing, and keep its sponge a little damp.
- Turn the P3 off before you put in or take out the ink cartridge.
Good For
- Colour signs and wall art
- Stickers and labels you print, then cut
- Gifts and décor in small batches
Shipping
- We aim to process and ship all orders within 1 to 2 business days.
- We provide Canada-wide shipping to every province and territory.
- International delivery is available to many countries via DHL and UPS, though we are not shipping to the USA at this time.
- If you live near our Edmonton or Sherwood Park locations, you can skip the shipping fees and visit us in person.
- Pre-ordered items will ship as soon as the inventory arrives at our warehouse.
For more details, see our full shipping policy.
Returns & Refunds
- Returns are accepted within 30 days of purchase for unopened items and within 14 days for opened items in new condition.
- To qualify for a return, items must be in original packaging with all accessories and proof of purchase.
- Please note that opened consumables like filament and resin, as well as modified items or final sale products, are not eligible for return.
- A 15% restocking fee applies to all non-defective returns to cover processing and inspection.
- If you receive a defective or damaged product, please contact us within 7 days of receipt and include photos of the issue.
For complete details on eligibility and shipping responsibilities, please see our full refund policy.
RETURNS & REFUNDS: 30 days for unopened items; 14 days for opened. Items must be in original condition; restocking fees apply. See our refund policy.