YouSu PLA Plus Matte • Stronger Everyday PLA

Need tougher everyday PLA with a matte finish, stronger layer stick, and more bend than regular PLA? YouSu PLA Plus Matte is a modified PLA for functional prints that look soft-matte and hold together better when parts get flexed or knocked around.

What's Included

• 1 × spool of YouSu PLA Plus Matte, 1.75 mm
• Spool size: 5 kg
• Dried spool, vacuum-packed in a resealable bag with desiccant

Print Settings

• Nozzle: about 205–225°C (start near the middle of the band and tune)
• Bed: about 40–60°C
• Speed: about 40–100 mm/s
• Dry if the spool sat open: about 50–60°C for 6–8 hours when the filament has sat open and prints look damp

Material

• PLA Plus Matte (modified PLA / PLA+ with matte finish)
• 1.75 mm diameter; manufacturer tolerance about ±0.03 mm
• Net spool size: 5 kg; dried and vacuum-packed with desiccant
• Stronger layer bonding and more bend than typical regular PLA for many everyday parts
• Low-shrink PLA-family behaviour: sticks well to bed and layer to layer on most FDM machines when tuned

Good To Know

• PLA Plus still prints in the everyday PLA lane: warm bed helps, but you usually do not need an enclosure like many ABS jobs
• If parts feel brittle or layers separate, nudge nozzle temperature up within the band and check first-layer stick before blaming the colour
• This listing is the matte PLA Plus line. Glossy / standard YouSu PLA Plus is a separate product

Good For

• Functional brackets, clips, and housings that need more toughness than regular PLA
• Everyday end-use parts and shop fixtures where a soft-matte look helps
• Classroom and hobby builds where stronger layer stick helps
• Longer print runs when you want a big 5 kg spool so you change rolls less often