Description
Product Features
- Easy removal by hand
- Perfect support interface
- Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
- Comes with High Temperature Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- ONLY used for support interface
- Not used for printing models alone
- Dry out before use
- Remove support structure promptly
- AMS compatible
- AMS lite NOT Compatible
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 80 °C，12h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 280 - 300 °C |
| Bed Temperature (with Glue) | 80 - 110 °C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.17 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 255 °C |
| Melt Index | 29.2 ± 2.1 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Downloads
Printing Tips
• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to Filament drying coveron WIKI.
• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.
